PortServer® TS W MEI

802.11b wireless serial server

Overview
Models
Specs
Documentation
Learn More

Alternate images

Easily connect serial devices to an 802.11b wireless Ethernet network
1, 2 or 4 ports
Switch selectable RS-232/422/485 serial RJ-45
WEP encryption (64-/128-bit)
Product datasheet

The PortServer TS W MEI family of serial servers makes it easy to network-enable serial devices to a wireless 802.11b infrastructure. Users will appreciate the new external antenna and hidden wireless card offered by the versatile one-, two-, and four-port solutions.

NOTE: This product is being replaced by the new ConnectPort™ TS W wireless serial server. The PortServer TS W will be available for a limited time only.

Learn more

	North America:	International:
LTB August 31, 2009: PortServer TS 1 W MEI View details \| Related accessories	70001954 Service agreement	70001955	Contact us
LTB August 31, 2009: PortServer TS 2 W MEI View details \| Related accessories	70001956 Service agreement	70001957	Contact us
LTB August 31, 2009: PortServer TS 4 W MEI View details \| Related accessories	70001958 Service agreement	70001959	Contact us

Specifications	PortServer® TS 1 W MEI	PortServer® TS 2 W MEI	PortServer® TS 4 W MEI
Features
Wireless	802.11b wireless radio, WEP supporting 64-bit and 128-bit encryption
Management	HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
Protocols	UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Security	SSHv2, SSL/TLS
Software	Device-initiated patented RealPort® with encryption COM port redirector
Status LEDs	Link, Power, Wireless bandwidth
Operating Systems	AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista® Note: TCP/UPD Socket Services are operating system independent
Dimensions (L x W x D)	5.25 in x 3.33 in x 1.31 in (13.34 cm x 8.46 cm x 3.33 cm)
Weight	0.45 lb (0.20 kg)
Other	Full modem and hardware flow control, RJ-45/DB-9F crossover cable included for optional serial configuration, Transmit up to 64 destinations over UDP
Interfaces - Wired
Serial
Ports	1 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD	2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD	4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ethernet
Ports	1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Interfaces - Wireless
802.11b
Transmit Power	100 mW (country dependent)
Receiver Sensitivity	-90 dBm
Atenna Gain	2 dBi
Antenna Connector Type	SMA, reverse polarity
Power Requirements
Power Input	9-30VDC
Power Supply (included)	North America: 12VDC/.5A max out; 120VAC in (wall mount) International: 12VDC/.5A max out; 100-240VAC in (small brick)
Power Consumption	Typical: 4 W; Max: 6 W
Surge Protection	4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5
Environmental
Operating Temperature	0° C to 50° C (32° F to 122° F)
Relative Humidity	20% to 90% (non-condensing)
Ethernet Isolation	1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD)	+15 kV air 6 AP and +8 kV contact discharge per IEC 100-4-2
Approvals
Safety	UL60950; CAN/CSA C22.2 No. 60950; EN60950
Emissions/Immunity	FCC Part 15 Subpart B & C, Class B; RSS-210: Issue 5; EN55022, Class B; EN301 489-3 Class B; EN300 328; EN61000-3-2 ,3; EN55024